1 x Lambo body
2 x IMR 18650 battery (1500mAh) - recommended high drain battery
2 x CE2 Clearomizer 2.8ohm
1 x Delrin Driptip (Solid Black / Clear transparent)
1 x Trustfire Universal Charger (dual slot)
1 x Zipper case
2 x 10ml USA Eliquid (any available flavor)
14 days warranty (Lambo body only for any malfunction due to manufacturing defects)
Kindly visit Electronic Cigarette Kit section to purchase.
This is the Lambo, the newest variable voltage electronic cigarette, an advanced personal vaporizer allowing you to vary the voltage from 3.0 volts to 6.0 volts in 0.1 volt increments. The Lambo is constructed from chrome-plated brass. This all metal construction makes this device a bit heavy but incredibly sturdy. The bright chrome finish looks awesome. This is the full size version. It uses 18650 IMR battery.
Selectable Voltage - adjust the voltage to your personal tastes - from 3v to 6v in 0.1v increments
LCD Screen - used to display the current voltage setting and optionally the current charge left in your battery
510 connection - gives you access to the greatest amount of cartomizers, atomizers and tanks from the vendor of your choice
Regulated Output - keeps the voltage the same regardless of the remaining battery charge. As the battery drains, the device will keep the voltage consistent giving you a consistent vaping experience until it is time to put in a fresh battery.
Accidental Overheating Protection - If the activation button is held down for more than 10 seconds, the device will stop providing power until the button is released. This will keep you from a mishap if you activate the unit in your pocket. We do recommend that you shut the unit down using the Power On / Off button (see below) BEFORE putting it in your pocket, though we all can forget.
Short Circuit Protection - the unit can detect a cartomizer / atomizer that has a resistance that is too low for the current voltage setting (will draw to many amps and generate too many watts). When this occurs the voltage will be reset to 3.7 volts to protect all of the components (and you). If the unit detects that the cartomizer / atomizer is shorted out, it will shut off power to the device.
Reverse polarity Battery Protection - this will protect you and the device in the situation where the battery is installed incorrectly. This sounds like a no-brainer, but I have personally burnt out 2 switches on my Epower by putting the battery in backwards.
Battery Monitoring / Over-Discharge Protection - the device will monitor the battery voltage and automatically turn off when the battery is voltage reaches a level of about 3.3 volts. This keeps you from over-discharging your batteries which will shorten their life and possibly damage them.
Battery Voltage Meter - always know how much charge is left in your battery - simply press the red power button 7 times and it will display the remaining voltage of the battery. The LCD screen will flash when the battery needs to be recharged, and will stop powering the device.
Current Protection - The unit is designed to monitor the current and shut itself off if it detects any excessive over-current conditions (greater than 2.5 amps).
Vent hole - located on the bottom of the unit - all lithium ion batteries have the potential for "unpredictable" behavior. The vent hole provides that extra margin of safety if something catastrophic happens with the installed battery.
Power on/Off Button - Hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.
+ Button - Press this button to increase the voltage by .1 volt (between 3 volts and 6 volts). When you try to go past 6 volts, the unit automatically goes to 3 volts.
- Button - Press this button to decrease the voltage by .1 volt (between 3 volts and 6 volts). When you try to go below 3 volts, the unit automatically goes to 6 volts.
+ and - Button Together - Press and hold both buttons for five second to disable the + and - button. This locks the device at the current voltage setting.
Be sure that the batteries that you are using match the e-cigarette manufacturer's recommendations. For additional information on the proper usage and maintenance procedures for these batteries, please visit the Battery University.
Be advised that "stacking" multiple batteries to achieve higher voltages is neither recommended nor warranted.