Kindly visit Electronic Cigarette Kit section to purchase.
iTaste VV main features:
Magnetic Atomizer Connection
Beyond the square shape, the connector has to be the hallmark of the uniqueness of this ecig. This connector is purely proprietary. Rather than a threaded connection, the atomizer simply slides on the battery.
Powerful magnets hold everything in place. This feature is sort of a mixed bag. On the plus side, it’s absolutely brilliant. The feature works amazingly well and makes it simple to change out accessories.
The square magnetic adapter which are small metal blocks with the proper 510 type thread on one end looks great on the iTaste. The adapter raises the height of the connector as well-meaning that the iTaste’s pen cap won’t work with a number of cartomizers.
Other than the square shape, there’s nothing terribly unusual about the tanks that go on the atomizers.
Filling the tank is easy enough, either stick a needle through the small hole in the top designed for the atomizer’s spike and fill. Alternately, users can just remove the cap (which is a soft silicone) and fill directly from the e-liquid bottle.
The main attraction here is the voltage adjustment. The iTaste VV can range from 3.0 to 5.0v in .1v increments. To adjust the voltage hold one of the two buttons down for a couple of seconds. The puff counter will display for a second and then the set voltage will be shown.
Use the two buttons to adjust the voltage up or down accordingly.
The first number mentioned above is the display of how many times users have hit the button. The puff counter will reset each time users turn the device off by clicking the power button 3 times in a row.
This is another unique feature. Basically, the e-cigarette measures the resistance of the attached atomizer or cartomizer and then recommends a voltage based on the resistance.
To access the feature, press both buttons at the same time. Two numbers appear. The first is the minimum suggestion while the second is the recommended max.
The 2nd revision of the iTaste now stays at whatever voltage users set it.