Tried several times charging this clone cloupor mini using micro usb located at bottom device using all type usb cable including my own phone charger and let it over night. The cut off circuit for over charging working great. What i can say, maybe some improvement being made on this circuit,. maybe ...
I can identified several features which not identical with the authentic version. The cut off vaping times limited to 10 seconds only,. maybe good or bad for some users. For me it's good enough already, personally never press the fire button more than 6 seconds., yes, already can produce tons of cloud of vapors. Never need 10 seconds actually. Don't know why the authentic cloupor mini need till 15 seconds, it's abuse the circuit already.
Also to switch the Right Mode or Left Mode very easy on this clone version, only need 4 clicks then you change the OLED orientation already. One handed operation for LH or RH users.
The Voltage also can be adjust from as low as 1.4v up to 8.0v, Which i know the authentic version only can be adjust as low as 3.6v up to 7.0v. Good or bad, you decide. while the wattage from 7.0w up to 30w , which is similar to the authentic cloupor mini.
See below for the details specification;
Cloupor Mini 30W Clone Features:
1. Size: 77.5mm*36mm*22mm
2. Output power: 7W-30W
3. Removable 18650 battery
4. VV/VW Mode can be switched manually
5. Vaping time counting ( 10S limited protection )
6. Output voltage : 1 .4V—8.0V
7. Max output current: 10 Amps
8. Can build on 0.5-3.0 ohm atomizer
9. Adjustable 510 Pin
10. Ohms reading calculates to 0.01ohm
11. Magnet back cover, no need to use screwdriver, more convenient
12. Instead of screen lock, It can be turned off
13. Over charge protection
14. 5 clicks to on/off , 3 clicks to change between VW and VV mode, 4 clicks for "LH" or "RH" mode.
15. Available color: Black
The packaging really similar with the authentic one,.. they made it 100% copy. Nobody knows it's a clone if not verify the security code. Let look what inside the packaging box.
*Cloupor Mini 30 watt (clone) included:
1 x Cloupor Mini box mod (Black)
1 x USB micro cable
1 x Cloupor soft velvet pouch
2 x spare magnet
1 x spare center pin
1 x mini screwdriver
User manuals and VIP card.
Cloupor mini really suitable with Kanger Subtank mini or any rebuildable atomizer such as Kayfun 4, Taifun GT II or Orchid V2 atomizer.
Click HERE or visit our E-Cig Kit section to purchase.